User's Manual

Loading Paper
2-8 OPERATION GUIDE
Transparencies must be placed on
the MP tray with the long edge
towards the printer.
Labels
Labels must be fed to the MP Tray. One label can be loaded at a time.
The basic rule for printing on adhesive labels is that the adhesive must
never come into contact with any part of the machine. Adhesive paper
sticking to the drum or rollers will damage the machine.
Label paper has a structure
comprising of three layers, as
shown in the diagram. The top
sheet is printed on. The adhesive
layer consists of pressure-
sensitive adhesives. The carrier
sheet (also called the linear or
backing sheet) holds the labels
until used. Due to the complexity
of its composition, adhesive-
backed label paper is particularly likely to give printing problems.
Adhesive label paper must be entirely covered by its top sheet, with no
spaces between the individual labels. Labels with spaces in between are
liable to peel off, causing serious paper jam problems.
MP Tray
Top sheet (white
bond paper)
Adhesive
Carrier sheet