User's Manual

Loading Paper

OPERATION GUIDE 2-9

Some label paper is manufactured with an extra margin of top sheet

around the edge. Do not remove the extra top sheet from the carrier sheet

until after printing is finished.

The table below lists the specifications for adhesive label paper.

Postcards

Up to 10 postcards

can be loaded at a

time. Fan the stack

of postcards and

align the edges

before loading them

in the MP tray.

Make sure the

postcards you are

going to set are not

curled. Feeding

curled postcards

may cause paper jams.

Some postcards have rough edges on the back (those are created when

the paper is cut). In this case, put the postcards on a flat place and rub the

edges with, for example, a ruler to smooth them.

Item Specification

Weight of top sheet 44 to 74g/m² (12 to 20 lb/ream)

Composite weight 104 to 151g/m² (28 to 40 lb/ream)

Thickness of top sheet 0.086 to 0.107mm (3.9 to 4.2 mils)

Composite thickness 0.115 to 0.145mm (4.5 to 5.7 mils)

Moisture content 4 to 6% (composite)

Top sheet

UnacceptableAcceptable

Carrier sheet

Rough Edge