User Manual

9-24
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
2
Enter the user information.
1 Select the key to which you want to register a user.
2 Select
[].
3 To specify the user from local users, select [Local User]. To specify from network users,
select [Network User].
The procedure differs depending on the transmission method selected.
Specifying the user from local users
Select the user to be set for simple login.
Specifying the user from network users
Select [Keyboard] for "Login User Name" and "Login Password", enter the information of the
user to be registered, and select [OK].
If you are specifying a user for whom a domain is set in network authentication, select the
"Domain" and select the domain where the user is registered.
Select [Next].
4 Enter the user name to be displayed, and select [OK].
5 [Password Login] > [On] or [Off] > [Icon]
NOTE
• To search by name or login user name, select [Menu] > [Search (Name)] or [Search
(Login User Name)].
• To sort the user list, select [Menu] > [Sort (Name)] and [Sort (Login User Name)].
NOTE
For details on entering characters, refer to the following:
Character Entry Method (page 11-8)
NOTE
For details on entering characters, refer to the following:
Character Entry Method (page 11-8)
10:10
Menu
System Menu/Counter.
01
04
07
02
05
08
03
06
09
1/3
Simple login settings - Simple Login Setup
End
None None None
None None None
None None None
Add - Network User
10:10
Keyboard
Login Password
Keyboard
Login User Name
< Back Next >Cancel
System Menu/Counter.