User Manual
Table Of Contents
- Preface
- Contents
- Overview
- Machine Features
- Color and Image Quality Functions
- Guides Provided with the Machine
- About the Operation Guide (this Guide)
- Menu Map
- 1 Legal and Safety Information
- Notice
- Safety Conventions in This Guide
- Environment
- Precautions for Use
- Laser Safety (Europe)
- SAFETY OF LASER BEAM (USA)
- Safety Instructions Regarding the Disconnection of Power
- Compliance and Conformity
- Other precautions (for users in California, the United States)
- Warranty (the United States and Canada)
- Legal Restriction on Copying/Scanning
- EN ISO 7779
- EK1-ITB 2000
- Wireless Connection (Mexico only)
- Security Precautions when Using Wireless LAN (If equipped)
- Limited Use of This Product (If equipped)
- Legal Information
- Energy Saving Control Function
- Automatic 2-Sided Print Function
- Resource Saving - Paper
- Environmental benefits of "Power Management"
- Energy Star (ENERGY STAR®) Program
- Notice
- 2 Installing and Setting up the Machine
- Part Names (Machine Exterior)
- Part Names (Connectors/Interior)
- Part Names (With Optional Equipments Attached)
- Connecting the Machine and Other Devices
- Connecting Cables
- Power On/Off
- Using the Operation Panel
- Touch Panel
- Login/Logout
- Default Settings of the Machine
- Network Setup
- Energy Saver function
- Quiet Mode
- Quick Setup Wizard
- Installing Software
- Checking the Counter
- Additional Preparations for the Administrator
- Command Center RX
- Transferring Data from Our Other Products
- 3 Preparation before Use
- 4 Printing from PC
- Printer Driver Properties Screen
- Printing from PC
- Printing from the Handheld Device
- Printing Data Saved in the Printer
- Specifying the Job Box from a Computer and Storing the Job
- Printing Documents from Private Print Box
- Deleting the Documents Stored in the Private Print Box
- Printing Document from Stored Job Box
- Deleting the Documents Stored in the Stored Job Box
- Printing Document from Quick Copy Box
- Deleting the Documents Stored in the Quick Copy Box
- Printing Document from Proof and Hold Box
- Deleting the Documents Stored in the Proof and Hold Box
- Monitoring the Printer Status (Status Monitor)
- Configuration Tool
- 5 Operation on the Machine
- Loading Originals
- Loading Paper in the Multipurpose Tray
- Favorites
- Application
- Registering Shortcuts
- Copying
- Frequently-Used Sending Method
- Sending Document via E-mail
- Sending Document to Desired Shared Folder on a Computer (Scan to PC)
- Sending Document to Folder on an FTP Server (Scan to FTP)
- Scanning using TWAIN or WIA
- Useful Sending Method
- WSD Scan
- Scanning with File Management Utility
- Using fax server to send a fax (fax server transmission)
- Sending to Different Types of Destinations (Multi Sending)
- Send to Me (E-mail)
- Canceling Sending Jobs
- Handling Destination
- How to use the FAX Function
- Using Document Boxes
- Operating using Removable USB Memory
- 6 Using Various Functions
- Functions Available on the Machine
- Functions
- Paper Selection
- Zoom
- Density
- Duplex
- Combine
- Color Selection
- Collate
- Original Size
- Original Orientation
- Mixed Size Originals
- Original Image
- EcoPrint
- Sharpness
- Contrast
- Background Density Adj. (Background Density Adjustment)
- Skip Blank Page
- Continuous Scan
- Job Finish Notice
- File Name Entry
- Priority Override
- File Format
- Duplex (2-sided Original)
- Sending Size
- File Separation
- Scan Resolution
- E-mail Subject/Body
- FTP Encrypted TX
- Storing Size
- Encrypted PDF Password
- JPEG/TIFF Print
- XPS Fit to Page
- 7 Status/Job Cancel
- 8 Setup and Registration (System Menu)
- 9 User Authentication and Accounting (User Login, Job Accounting)
- Overview of User Login Administration
- Enabling User Login Administration
- Setting User Login Administration
- Authentication Security
- Adding a User (Local User List)
- Changing User Properties
- User Login Administration for Printing
- Managing the Users to Scan Using TWAIN
- Managing the Users to Scan Using WIA
- Managing the Users that Send Faxes from a PC
- Group Authorization Settings
- Guest Authorization Set.
- Obtain NW User Property
- Simple Login Settings
- ID Card Settings
- PIN Login Settings
- Using User Login Administration
- Overview of Job Accounting
- Enabling Job Accounting
- Setting an Account
- Configuring Job Accounting
- Using Job Accounting
- Unknown User Settings
- 10 Troubleshooting
- Regular Maintenance
- Using the Maintenance Menu
- Troubleshooting
- Adjustment/Maintenance
- Clearing Paper Jams
- Jam Location Indicators
- Remove any jammed paper in Cassette 1
- Remove any jammed paper in Cassette 2
- Remove any jammed paper in Cassette 3
- Remove any jammed paper in the Multipurpose Tray
- Remove any jammed paper inside of the Machine
- Remove any jammed paper in Rear Cover
- Remove any jammed paper in the Document Processor
- 11 Appendix
1-12
Legal and Safety Information > Notice
GPL/LGPL
This product contains GPL (http://www.gnu.org/licenses/gpl.html) and/or LGPL (http://www.gnu.org/licenses/lgpl.html)
software as part of its firmware. You can get the source code, and you are permitted to copy, redistribute and modify it
under the terms of GPL/LGPL. For further information including availability of the source code, visit
http://www.kyoceradocumentsolutions.com/gpl/.
OpenSSL License
Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment:
"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.
(http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived
from this software without prior written permission.
For written permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without
prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software
developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so
as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The
following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the
SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the
holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.
If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.
This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the
package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met: