User Manual

9-28
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Simple Login Setup
Register users to use simple login. You can add up to 20 users.
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 [User Login Setting] > [Simple Login Settings] > [Simple Login Setup]
2
Enter the user information.
1 Select the key to which you want to register a user.
2 Select
[].
3 To specify the user from local users, select [Local User]. To specify from network users,
select [Network User].
The procedure differs depending on the transmission method selected.
Specifying the user from local users
Select the user to be set for simple login.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
ECOSYS M6230cidn ECOSYS M6235cidn
ECOSYS M6630cidn ECOSYS M6635cidn
Login User Name: 3000 3500
Login Password: 3000 3500
NOTE
• To sort the user list, select [Menu] > [Sort (Name)] and [Sort (Login User Name)].
• To search by name or login user name, select [Menu] > [Search (Name)] or [Search
(Login User Name)].
10:10
Menu
System Menu/Counter.
01
04
07
02
05
08
03
06
09
1/3
Simple login settings - Simple Login Setup
End
None None None
None None None
None None None