Reference Guide

`Ü~éíÉê=P=`~ääáåÖ NV
péÉÉÇ=aá~äáåÖ
péÉÉÇ=aá~äáåÖ=
Speed dialing allows you to quickly dial stored phone numbers.
Before you can speed dial a number, you must enter the number in your Contacts
directory and assign it a speed dialing location (such as 2, 3, or 4).
kçíÉ
péÉÉÇ=Çá~äáåÖ=äçÅ~íáçå=N=áë=êÉëÉêîÉÇ=Ñçê=óçìê=îçáÅÉã~áä=~ÅÅÉëë=åìãÄÉêK
qç=~ëëáÖå=~=ëéÉÉÇ=Çá~äáåÖ=äçÅ~íáçå
A speed dialing location is the number or numbers that you enter to speed dial a phone
number.
Before you begin, the phone number you want to speed dial must be saved as a contact
card in the Contacts directory. To save a contact card, see “To save a phone number
from the home screen” on page 29.
NK Open a saved contact card as follows:
~K From the home screen, press down to list contacts.
ÄK Use and to select the contact you want.
OK Press down to highlight the contact’s phone number and press to select
it.
A list of options appears.
PK Use and to select péÉÉÇ=aá~äáåÖ.
Available speed dialing locations (such as 2, 3, 4) are listed on the screen. The speed
dialing location is the number you will enter to speed dial the contact.
QK Make sure ^ëëáÖå is highlighted, then select the speed dialing location you want for
this contact.
A message appears: “[Contact] Saved as speed dial [location].”
båíÉêáåÖ=m~ìëÉë=áå=péÉÉÇ=aá~ä=kìãÄÉêë
You can include a pause in a phone number. A íáãÉÇ=é~ìëÉ causes the phone to stop
dialing for two seconds. A
Ü~êÇ=é~ìëÉ causes the phone to stop dialing until you select
oÉäÉ~ëÉ.
When you save the phone number of an automated service such as voicemail, you can
include a pause where you would be required to stop dialing for a few seconds before
you select an option or enter a password. For example, you can program your phone
 Jane
Saved as
speed dial 5.