Specifications

5-35
Operation on the Machine > Scanning
Scan the Image to the Specified Destination
Use the Preset Scan Destination (When Connecting the Machine to the PC via USB)
If originals are scanned after selecting [Local PC] as the destination, an image is saved in "My Documents" in the
computer (Host PC) connected to the machine via USB. If KYOCERA Client Tool is activated on the Host PC, originals
can be scanned only by operating the machine.
Use Your Desired Destination
When saving an image in a location other than "My Documents", the destination needs to be set beforehand by using
KYOCERA Client Tool.
• When Connecting the Machine to the PC via USB
When the shared folder in the computer (Client PC) on the network is selected for the destination, an image can be
saved on the computer that is not connected to the machine via USB.
• When Connecting the Machine to the PC on the Network
*1
When the machine is connected to the PC on the network, an image can be saved in the PC on the network.
*1 The optional Network Interface Kit is required.
NOTE
The administrator of the machine needs to set the destination number in such a manner that the destination number
does not overlap on the network.
Scan the originals at the machine.
(Refer to Scan the Image to the
Specified Destination on page 5-37.)
1
An image is saved in "My
Documents."
2
Host PC
USB
Scan the originals at the machine.
(Refer to Use Your Desired
Destination on page 5-38.)
3
Configure the destination by using
KYOCERA Client Tool. (Refer to Setting
Up the Scan Destination on page 2-41.)
An image is saved in the
folder set by KYOCERA
Client Tool.
Host PC Client PC
USB Network
Network
Host PC
USB
21
13
An image is saved in the
folder set by KYOCERA
Client Tool.
Scan the originals at the machine.
(Refer to Use Your Desired
Destination on page 5-38.)
2
Configure the destination on the PC on the
network by using KYOCERA Client Tool.
(Refer to Setting Up the Scan Destination
on page 2-41.)
Network
Network
Network
Network