Specifications

7-31

System Menu and KYOCERA Client Tool > Default Settings on the PC (KYOCERA Client Tool)

Quick Scan Settings

No. Item Description

1 Output name Assign a document name to scanned images. When multiple images are saved in the same folder, a

three-digit incrementing number such as Scan_001, Scan_002... is appended to the end of the file

name. Up to 16 characters can be entered.

2 File format Specify the image file format.

Value: BMP, JPEG, PNG, TIFF, PDF, High-Compression PDF, CCITT Group 4, Image Mask, High-

Compression PDF, JBIG2, Mask + Image Mask

3 File format settings (The item displayed changes depending on the value specified for File format.)

Separate files When this is selected, scanned data is separated into files page by page.

Quality Set the image quality. Increasing the number results in higher quality and decreasing the number

results in lower quality. Higher quality will make the stored files larger.

Value: 1 to 100

NOTE

• This setting is valid for PDF, TIFF, and JPEG file formats.

• Non-numeric characters cannot be entered. If entered number is beyond range, the max/min value

will be restored.

PDF/A-1 Set PDF/A-1 format type.

Value: Off, PDF/A-1a, PDF/A-1b

Quality Stage Set the quality level for High Compression PDF.

Value: Standard, Compression Ratio Priority, Quality Priority

4 Preferences Displays the TWAIN settings screen. For detail, refer to TWAIN Settings on page 7-29.

5 OK/Cancel/Apply Clicking [OK] exits the Quick Scan Settings after applying the modified scan settings.

Clicking [Cancel] exits the Quick Scan Settings without applying the modified scan settings.

Clicking [Apply] applies the modified scan settings without exiting the Quick Scan Settings.