Specifications

9-9
Troubleshooting > Troubleshooting
Printouts are curled. Is the paper damp? Replace the paper with new paper. page 3-7
page 3-10
Cannot print. Is the machine plugged in? Plug the power cord into an AC outlet. ―
Is the machine powered on? Turn on the power switch. page 2-9
Are the printer cable and network cable
connected?
Connect the correct printer cable and
network cable securely.
page 2-6
Is the machine used as a shared
printer?
Start up the Host PC. ―
Was the machine powered on before the
printer cable was connected?
Power on the machine after connecting
the printer cable.
―
Is the print job paused? Resume printing. page 6-9
Printouts are totally too light. Is the paper damp? Replace the paper with new paper. page 3-5
Have you changed the density? Select appropriate density level. page 5-13
page 7-21
Is the toner distributed evenly within the
toner container?
Shake the toner container from side to
side several times.
page 9-3
Is EcoPrint mode enabled? Disable EcoPrint mode. page 5-22
page 7-19
― Make sure the paper type setting is
correct for the paper being used.
page 7-12
Part of the image is
periodically faint or shows
white lines.
― Run [Drum Refresh]. page 7-21
Printouts are fuzzy. Is the machine being used in conditions
of very humid, or humidity or
temperature rapidly changes?
Use in an environment that has suitable
humidity.
―
Texts are not clearly printed. Did you choose appropriate image
quality for the original?
Select appropriate image quality. page 5-13
Symptom Checkpoints Corrective Actions
Reference
Page