Specifications

FAX Operation (Advanced)
4-34
After completing the settings, click Submit to save the settings.
To set forwarding of received faxes that do not meet the conditions, click Advanced in Not complying with the
requirements in the condition list. Set the status to
On and then set each item. When Use Requirements List is
selected, set the action that takes place when a fax is received with conditions that are not registered in the list. Saving
to a fax box is not possible. If the status is set to
Off , received faxes that do not meet the conditions will be printed.
Print Settings
FAX/i-FAX > Common > RX/Forward Requirements > Requirement List > Add > Print
Use this page to specify the print settings.
The settings available on the Print page are shown below.
After completing the settings, click Submit to save the settings.
Priority Prioritize the search keys when conducting searching over
the sending criterions.
Requirement Type Select the condition type from the following items.
• FAX Sub Address
• FAX Number
• FAX Reception Port
• i-FAX Address
When an item is selected, the text box below it accepts
entry of the necessary information on the selected item. For
details, refer to the Command Center RX Operation Guide.
Print To print the fax, click Print. The Print page is displayed.
(Refer to Print Settings on page 4-34.)
Forward To select the forwarding destination, click Forward. The
Forwarding page is displayed. (Refer to Forwarding
Settings on page 4-35.)
Save to FAX Box To save received documents in a FAX box, click Save to
FAX Box. The FAX Box page is displayed. (Refer to FAX
Box Settings on page 4-36.)
Item Description
Name Displays the condition name.
Status Displays whether the condition is currently used.
Print Specifies whether to print on paper.
Copies to print When the previous item is set to On, specify the number of
copies.
Item Description