Specifications

Setup and Registration
6-32
4 Press [FAX No. Entry].
5 Use the numeric keys to enter fax number of the
other party.
For details, refer to Direct Transmission on page 3-
4.
NOTE: When encrypted transmission has been set to
a destination in the Address Book or One-touch keys,
you can use the destination.
6 Press [Detail] and [Change] of Encrypted
Transmission.
7 Press [On] and select the encryption key number.
8 Press [OK] and go to step 10. When the selection
of an encryption box is required by the other party,
press [Encryption Box] and go to the next step.
NOTE: When the machine receives originals, the
encryption box is not used.
9 Press [On] and use the numeric keys to enter the
encryption box number (4 digits), and press [OK].
10 Press [OK].
11 Press [OK].
12 Press the Start key. The transmission will start.
10/10/2010
Cancel
OK
FAX No. Entry - Detail
Destination
Status
ECM
Change
Transmission Start Speed
Encrypted Transmission
Sub Address
Change
Change
Change
:
:
:
:
On
33600bps
Off
Cancel OK
FAX No. Entry - Encrypted Transmission
Off
On
Off
Key 01
1/1
Encryption
Box
Encryption Key No.
10/10/2010
Status
Key 04
Key 05
Key 03
Key 02
Enter Destination.
OK
Enter box number using numeric keys.
Cancel
Off
FAX No. Entry - Encryption Box
On
Box No.
10/10/2010 10:10
Status