Specifications

Part Names and Functions

1-4

Machine

This chapter explains the names of parts when the machine is used as a fax machine.

For the parts required when functions other than FAX are used, refer to the machine’s Operation Guide.

* The machine may differ from the above illustration depending on the type of your machine.

IMPORTANT: You cannot receive a fax when the main power switch is turned off. To receive faxes with the

power turned off, press the Power key on the operation panel.

1 Operation panel Perform the fax operation with this panel.

2 Main power

switch

Set this switch to the ON (|) side when

performing the fax or copier operation. The

touch panel lights to enable operation.

3MP (Multi

Purpose) tray

Set the paper in this tray when using a type of

paper other than the cassette (e.g., when

using special paper).

4 LINE connector

(L1)

Connect the modular cord for the telephone

line to this connector. This connector is Port 1.

5 LINE connector

(L2)

If you install 2 optional FAX Kits (Dual FAX

option), you can use Port 2. Connect the

modular cord for the telephone line to this

connector.

6 TEL connector

(T1)

When using a commercially available

telephone set, connect the modular cord to

this connector.