User manual

Chapter 10 Setting Up Network Connections 139
Using Fax/Modem mode with the wireless modem
14. To preset the phone to receive specific types of data calls, tap the beside Incoming Calls and
select one of the following:
Incoming data call setup
1. Slide the phone into the sync cradle. Do one of the following:
■ If the sync cradle is attached to the port you use for synchronizing data, turn off the
HotSync Manager on your computer by clicking in the Windows system tray. On the
menu, choose
Exit.
■ If you are using a data cable and/or a different port than the one you use for
synchronizing data, it is not necessary to turn off the HotSync Manager.
2. Tap to view the Applications screen.
3. Tap Fax/Modem .
4. Tap next to Incoming Calls and select an option for incoming calls.
Voice
Expect all incoming calls to be voice calls.
Fax, next call
Expect the next incoming call to be a fax transmission. Then return to standard
voice mode.
Data, next call
Expect the next incoming call to be a data transmission. Then return to
standard voice mode.
Fax, until off
Expect all incoming calls to be fax transmissions until this setting is changed
or the phone power is turned off.
Data, until off
Expect all incoming calls to be data transmissions until this setting is changed
or the phone power is turned off.
Voice
Expect all incoming calls to be voice calls.
Fax, next call
Expect the next incoming call to be a fax transmission. Then return to
standard voice mode.
Data, next call
Expect the next incoming call to be a data transmission. Then return to
standard voice mode.
Fax, until off
Expect all incoming calls to be fax transmissions until this setting is
changed or the phone power is turned off.
Data, until off
Expect all incoming calls to be data transmissions until this setting is
changed or the phone power is turned off.