User manual

152 Kyocera 7135 Smartphone Reference Guide
Setting Incoming Call preferences
Setting Incoming Call preferences
You can choose from a variety of ringer sounds for incoming phone calls. If you prefer, you can
assign different sounds to different categories of calls. For example, you can distinguish between
your business calls and your personal calls by selecting a different sound for each.
1. Tap to view the Applications screen.
2. Tap to display the last Phone Preferences screen you used.
3. Tap in the upper-right corner and select Incoming Calls.
To set the ringer on incoming calls
1. To choose how the phone signals an incoming call, tap beside Call /Ring Vibe and select one
of the following options:
■ Ring Only—The phone rings and does not vibrate.
■ Vibrate Only—The phone vibrates and does not ring.
■ Vibe then Ring—The phone vibrates for a few seconds, then rings.
2. To adjust the ringer volume, tap beside Ringer Volume. Select a volume level between Low
and High. If you want the ringer volume to increase with each ring, select
Escalate.
3. Tap beside Ringer Type and select a ringer sound. When you select a sound, you hear a
sample of it.
4. If you want to hear different ringer sounds for different categories of calls, do the following:
a. Put a check mark in the Ring by Category check box.
b. Tap under Category. Select a category of calls.
Unfiled
Business
Personal
QuickList
c. Tap under Ringer. Select the sound for that category of calls.