User manual

Chapter 13 Setting PDA Preferences 171
Setting Network preferences
1. Tap Script from the Details screen.
The Log in Script screen is displayed.
2. Tap beside End to show the command picklist.
3. Tap the command you want to use from the pick list. If the command requires additional
information, a field appears to the right of it for you to enter the information. The following
commands are available:
4. Tap OK twice to return to the Network Preferences screen.
Wait For
Tells your smartphone to wait for specific characters from the TCP/IP server
before executing the next command.
Wait For
Prompt
Detects a challenge-response prompt coming from the server and then displays
the dynamically generated challenge value. You then enter the challenge value
into your token card, which in turn generates a response value for you to enter
on your smartphone. This command takes two arguments, separated by a
vertical bar (|) on the input line.
Send
Transmits specific characters to the TCP/IP server to which you are connecting.
Send CR
Transmits a carriage return or LF character to the TCP/IP server to which you
are connecting.
Send User ID
Transmits the User ID information entered in the User ID field of the Network
Preferences screen.
Send
Password
Transmits the password entered in the Password field of the Network
Preferences screen. If you did not enter a password, this command prompts
you to enter one. The Password command is usually followed by a
Send CR command.
Delay
Tells your handheld to wait a specific number of seconds before executing the
next command in the login script.
Get IP
Reads an IP address and uses it as the IP address for your smartphone. This
command is used with SLIP connections.
Prompt
Opens a dialog box and prompts you to enter text of some kind (for example, a
password or a security code).
End
Identifies the last line in the login script.