User manual

Chapter 2 Making and Receiving Calls 19
Ending calls
Ending calls
To end a call
Press .
The length of the call in minutes and seconds appears on the screen for about 10 seconds.
Adjusting sounds
It is easy to adjust the speaker volume, set the microphone to mute, or turn off the ringer on your
Kyocera 7135 smartphone.
You can adjust the ringer volume or set your phone to blink or vibrate instead of ringing when
you have an incoming call. For example, if you want to silence the ringer during a meeting, you
can do so using either the navigator key on the keypad or the Preferences screen.
You can make many adjustments to the sounds using the Preferences screens. You can adjust the
phone ringer separately from alert beeps or other sounds. For example, if you have set an alert for
a Date Book event, the phone beepd at the scheduled time, even if the phone ringer is turned off.
To adjust the speaker volume
Press the volume up or volume down on the side of the phone during a call.
To mute the microphone during a call
The normal setting for your microphone is “unmute”, so your voice can be heard by the person
you are calling. But sometimes you may want to select mute (so your voice cannot be heard).
An example would be muting a phone conversation in order to speak privately to a person next
to you. You would select mute (so phone party cannot hear), have your private conversation, then
select unmute when ready to return to the phone party.
To mute the microphone:
1. During a call, the Options menu appears at the bottom of the screen. Mute is already
highlighted in the menu.
2. Press to select Mute. The phone party can no longer hear you. Unmute appears in
the menu.
3. To unmute your call, select Unmute and press . The phone party can hear your
voice again.
To put the phone in Speakerphone mode
1. Press the Speakerphone key .
2. To turn Speakerphone mode off, press the Speakerphone key .