User manual

Basic Operation
3-22
Follow the steps as below for punching.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press [Org./Paper/Finishing]and then press
[Staple/Punch].
4 Select the type of hole punching.
5 Press [Original Orientation] to choose orientation of
the originals, either [Top Edge on Top] or [Top Edge
on Left]. Then press [OK].
6 Press [OK].
7 Press the Start key.
If the original is placed on the platen. Place the next
original and press the Start key. Copying begins.
If all original pages have been scanned, press
[Finish Scan]. Copying begins.
Staple/Punch
Top
Right
Staple
Top
Left
2 staples
Top
2 staples
Right
Copies
Status
Cancel OKAdd Shortcut
Top Edge
on Top
Original
Orientation
Punch
Off
Off
Saddle
Stitch
2 staples
Left
2 holes
Top
2 holes
Left
3 holes
Left
3 holes
Top
3 holes
Right
2 holes
Right
100%
A4
A4
:
:
:
Preview
Original
Zoom
Paper
10/10/2010 10:10