User manual

Default Setting (System Menu)

9-79

Interrupt Clear Timer

Set the period after which the machine reverts to Normal mode when it has been set to Interrupt Copy mode

and then left unused. Any period between 5 and 495 seconds (in five-second increments) can be set.

The procedure for setting the interrupt clear timer is explained below.

1 Press the System Menu key.

2 Press [ ], [Date/Timer], [ ] and then [Change] of Interrupt Clear Timer.

3 Press [+] or [-] to enter the time for the interrupt clear timer.

4 Press [OK].

Error Job Skip

Set whether a job for which a "Add paper in cassette #" or "Add paper in Multi Purpose tray" error occurred when

the job was started is automatically skipped after a set period of time elapses. The period of time can be set

within the range 5 to 90 seconds (increments of 5 seconds).

NOTE: When a job is skipped, it is moved to the end of the job queue.

The procedure for setting the Error Job Skip is explained below.

1 Press the System Menu key.

2 Press [ ], [Date/Timer], [ ] and then [Change] of Error Job Skip.

3 Press [Off] or [On].

4 If you selected [On], set the time until the job is skipped with [+] or [-].

5 Press [OK].