User manual

Troubleshooting
12-19
12
1104 Failed to send the e-mail. Check the e-mail address.
NOTE: If the address is rejected by
the domain, you cannot send the e-
mail.
3-24
Failed to send i-FAX. Check the i-FAX address.
NOTE: If the address is rejected by
the domain, you cannot send i-FAX.
FAX System (V)
Operation Guide
Chapter 8
"Internet Faxing
(i-FAX) (Option)"
1105 Failed to send via SMB. Select [On] of the SMB settings on
the Command Center RX.
2-27
Failed to send the e-mail. Select [On] of the SMTP settings on
the Command Center RX.
Failed to send via FTP. Select [On] of the FTP settings on the
Command Center RX.
Failed to send i-FAX. Select [On] of the i-FAX settings on
the Command Center RX.
FAX System (V)
Operation Guide
Chapter 8
"Internet Faxing
(i-FAX) (Option)"
1106 Failed to send the e-mail.
Failed to send i-FAX.
Check the sender address of SMTP
on the Command Center RX.
2-27
1131 Failed to send via FTP. Select [On] of the secure protocol
settings on the Command Center RX.
2-27
1132 Failed to send via FTP. Check the following of the FTP
server.
- Is FTPS available?
- Is the encryption available?
2-27
2101 Failed to send via SMB.
Failed to send via FTP.
Check the network and SMB settings.
Check the network and FTP settings.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
- Host name and IP address
- Port number
2-27
Failed to send the e-mail.
Failed to send i-FAX.
Check the network and Command
Center RX.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
-
POP3 server name of the POP3 user
- SMTP server name
Error
Code
Error Message Corrective Actions Reference Page