User's Manual

COMMAND CENTER Pages
46 KYOCERA COMMAND CENTER
Advanced > Security > Secure Protocols
You can encrypt communication between a PC and this machine using SSL
encryption.After you have changed this setting, you must restart this machine. For the
restarting procedure, refer to Basic > Defaults > Reset on page 9.
NOTE: When the SSL is set to On and HTTP Security is set to Secure (HTTPS), the
document boxes cannot be accessed the TWAIN driver.
Advanced > Security > IEEE802.1x
The IEEE802.1x security protocol allows the user to login to the secured networks based
on the client certificates.
Run once now
You can test this by clicking the Send button to immediately
send a report.
Item Description
Item Description
SSL
Specifies whether or not to use the SSL protocol.
Effective
Encryption
Selects the encryption algorithm(s) to be used.
HTTP Security
Specifies the security level.
Secure
Only
(HTTPS)
Encrypts all communication. Access is possible only with a
URL that begins with "https://." Access attempts using an
ordinary http:// URL are automatically redirected to the URL
where "http://" is replaced with "https://."
Not
Secure
(HTTPS &
HTTP)
Enables access for both encrypted and unencrypted
communication. Access is possible with https:// and http://
URLs. The former URL establishes encrypted communication
and the latter establishes normal communication.
IPP Security
Specifies the security level.
Secure
Only (IPP
over SSL)
Encrypts all communications.
Not
Secure
(IPP over
SSL&IPP)
Enables access for both encrypted and unencrypted
communications.
Item Description
IEEE802.1x
Specifies whether or not to use the IEEE802.1x protocol.