User's Guide

Get Started 3
2. Charge your battery.
 Plug the smaller end of the micro-USB cable into the device’s charger/accessory jack.
 Plug the other end of the USB cable into the charger, and then plug the charger into
an electrical outlet.
Note: Your device’s battery should have enough charge for the device to turn on and find a
signal, set up voicemail, and make a call. You should fully charge the battery as soon as
possible.
3. Press and hold the Power button to turn your device on.
 If your device is activated, it will turn on, search for the service.
 If your device is not yet activated, see the “Activation” section of your “Get Started
Guide” for more information.
Set Up Voicemail
You should set up your voicemail and personal greeting as soon as your device is activated.
Always use a password to protect against unauthorized access. Your device automatically
transfers all unanswered calls to your voicemail, even if your device is in use or turned off. See
Visual Voicemail and Voicemail (Traditional) for details.
To set up visual voicemail:
1. Press
Home
, and touch >
Voicemail
.
2. Touch Personalize now and follow the system prompts to:
 Create a password (part of standard voicemail).
 Record your name announcement.
 Record your greeting.
3. When prompted to enter information, touch Dialpad to bring up the onscreen dialpad to
enter your numeric responses.
4. Once you have completed the setup process, return to the voicemail page (see step 1).