User's Guide

User Guide 53
Bluetooth settings
From Bluetooth settings , the following
features can be modified.
Enable Bluetooth
Bluetooth technology allows devices to
wirelessly exchange information over a short
distance of up to 32 feet (9.8 meters).
Before the device can connect with another
Bluetooth device, the Bluetooth feature on the
device must be enabled.
Touch
Bluetooth to activate Bluetooth. A
check mark indicates Bluetooth is active. The
device automatically scans for available
devices. Once the scan is complete, a list of
available devices is shown.
Note: Using Bluetooth will drain the battery
faster.
Pair with a Device
To enable the device to communicate with a
Bluetooth device, the device needs to "pair" the
Bluetooth device. The following instructions
describe the process. Reference the user guide
provided with the Bluetooth device, if
necessary.
1. Prepare the Bluetooth device (accessory)
for pairing as described in the device’s user
guide.
2. Touch
Scan for devices . The device then
searches and detects any available
Bluetooth device in the vicinity. The
Bluetooth feature on the device must be
enabled to find devices.
3. At the device list, touch and hold the
device. If prompted, accept the pairing.
4. If necessary, enter the password provided
with the Bluetooth device.
5. Touch
OK to save pairing.
To unpair a device, select the device. Press the
Menu key and select Unpair or Disconnect &
unpair
(if connected).
Note: Once a Bluetooth device has been
paired, the device will not prompt for password
entry again.
Connect to a Device
Before using Bluetooth, the device must be
ready to communicate with another device.
This is called “connecting”. Some Bluetooth
devices will attempt to automatically connect
to the device when the Bluetooth feature is
turned on. To connect manually, do the
following:
1. At the device list, touch and hold a paired
Bluetooth device.
2. Press the
Menu key, touch Pair &
connect
. The Bluetooth device can now
connect with the device.
To disconnect from a Bluetooth device, touch
Disconnect .
Note: When Bluetooth hands-free headsets or
car kits are connected to the device, the
Bluetooth connection icon appears on the
status bar. When a second headset is paired, the
first headset is automatically disconnected.