User's Guide

Get Started 3
 Replace the cover, making sure all tabs have seated and there are no gaps ( ).
2. Charge your battery.
 Plug the USB connector into the charger/accessory jack on the lower left side of your
phone.
 Plug the AC adapter into an electrical outlet.
Note:
Your phone’s battery should have enough charge for the phone to turn on and find a
signal, set up voicemail, and make a call. You should fully charge your battery as soon
as possible.
3. Press and hold the
Power
button to turn your phone on.
 If your phone is activated, it will turn on and search for Sprint service.
 If your phone is not yet activated, see Activate Your Phone for more information.
To remove the battery, after removing the battery compartment cover (see Install the battery),
grasp the tab extending from the battery pack and pull the battery out of its compartment.
Warning: Do not handle a damaged or leaking Li-Ion battery as you can be burned.