User's Manual

8 User Manual
Get the Phone Ready
You need to insert a SIM card into your
phone and charge the battery to begin
setting up your phone.
Charge the Battery
1. Plug the smaller end of the micro-USB
cable into the phone’s charger/USB
port.
2. Plug the other end of the USB cable into
the charger and then plug the charger
into an electrical outlet.
Note: Your phone’s battery should have
enough charge for the phone to turn on
and find a signal, set up voicemail, and
make a call. You should fully charge the
battery as soon as possible.
Install a nano SIM Card
1. Insert your fingernail into the slit at the
bottom of your phone and lift the cover
up gently.
2.
Slide the flap of the SIM card holder in
the direction of the arrow to unlock it
( ) and lift the flap ( ).
3.
Insert a nano SIM card into the flap of
the SIM card holder, making sure the
cut-off corner is at the top right and the
card is inserted behind the SIM guide
tabs( ).
4.
Lower the flap of the SIM card holder
( ) and slide the flap in the direction of
the arrow to lock it ( ).Bottom of SIM
card should rest against stopper ( ).