User's Manual

6 Important Safety Information
If your phone gets wet:
Water lodged in the headset jack may cause the phone to falsely detect an
inserted headset (in which case the loudspeaker and/or earpiece audio will be
disabled) until the water is removed. Water in the microphone port may affect
outbound audio quality. These are temporary conditions and will subside once
the phone is dry.
1. Do not open the back cover as this may allow water to get inside the
sealed portion of the phone.
2. Wipe the phone surfaces with a dry clean cloth.
3. Water in the phone’s open ports may affect sound quality and should be
removed with puffs of air directly into the ports. Phone audio may not
operate properly until ports are dry. Apply a dry clean cloth to the open
areas and crevices to remove the moisture left on the phone:
microphones; speakers; power button; volume button; headset jack; and
charger/USB port.
4. Repeat the process until the phone is completely dry.
Charging
● Dry your phone with a clean cloth before charging.
● Do not touch the charger, charging cable, or charger/USB port with wet hands.
Doing so may cause electric shock, injury, or product failure.
● Do not charge your phone in a wet or damp place, such as in a bathroom or
near a kitchen sink.