User's Manual

Settings 151
 The password, for a household wireless LAN router, is sometimes found on a sticker on the
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
 Entering a password is not required if an access point is not security protected.
Advanced Wi-Fi Settings
The advanced Wi-Fi settings menu lets you set up and manage wireless access points.
● Enable Notification when Open Networks Are Available: From Wi-Fi settings, tap Menu >
Advanced > Network notification.
 The setting is available when Wi-Fi is turned on.
 Tap Network notification to turn the option on or off.
● Set Timing for Pausing a Connection: From Wi-Fi settings, tap Menu > Advanced > Keep
Wi-Fi on during sleep and then select a setting.
● Enable Wi-Fi only for Stable Connection: From Wi-Fi settings, tap Menu > Advanced >
Avoid poor connections.
 The setting is available when Wi-Fi is turned on.
 Tap Avoid poor connections to turn the option on or off.
● Check MAC Address: From Wi-Fi settings, tap Menu > Advanced.
 MAC Address appears below “MAC Address.”
● Check IP Address: From Wi-Fi settings, tap Menu > Advanced.
 IP Address appears below “IP Address.”
Mobile Hotspot Settings
Use the settings menu to configure your Mobile Hotspot settings, which allow you to share your phone’s
data service with multiple Wi-Fi capable devices. You can also share your phone's Internet connection via
a USB cable. For details on your phone’s tethering and Mobile Hotspot settings, see USB Tethering and
Mobile Hotspot
1. From home, tap Apps > Settings > More .
2. Tap Tethering & Hotspot.
3. Tap the ON/OFF switch next to USB tethering to turn it on .
 Hotspot is enabled.
 To disable Hotspot, tap the switch again .