QCP 800/1900 USER GUIDE Kyocera Wireless Corp. 10300 Campus Point Drive http://www.kyocera-wireless.com 80-B6675-1EN, Rev.
This manual is based on the production version of the QCP 800 and QCP 1900 phone. Software changes may have occurred after this printing. QUALCOMM reserves the right to make changes in technical and product specifications without prior notice. The products and equipment described in this documentation are manufactured under one or more of the following U.S.
CONTENTS Introduction ............................................................5 Highlights ............................................................5 Important Information........................................6 Getting Started .......................................................7 Sliding Earpiece ..................................................7 Display Indicators .............................................10 Using the Battery..............................................
Menu Feature....................................................... 32 Main Menu ........................................................32 Menu Access Method ........................................32 Shortcut Menu Access Method .........................33 Menu Item Descriptions ...................................33 Paging, Messaging, and Voice Mail................. 40 New Message Alert ...........................................41 Viewing Pages and Messages ...........................
INTRODUCTION Highlights Congratulations on your purchase of the QCP 800 or QCP 1900 phone.
Important Information Caution Any changes or modifications not expressly approved in this document could void your warranty for this equipment and void your authority to operate this equipment. Warning Only use the batteries, antennas, and chargers provided by QUALCOMM. The use of any other type will invalidate the warranty and may be dangerous. FCC/IC Notice The phone may cause TV or radio interference (i.e., when using the telephone in close proximity to receiving equipment).
GETTING STARTED This section includes drawings of the important phone parts and instructions on getting your phone powered up and ready to use. Sliding Earpiece The earpiece moves up and down. It must be up to use any of the phone’s features including making calls. When the earpiece is down, the keypad is locked and you will see a lock icon. You will hear the phone ring (if the phone is on) but must raise the earpiece to answer the call.
Front View of the Phone 8
Front View Description 1 Red Light lights when power key is pressed and when there are incoming calls and messages. 2 Volume/Scroll Keys let you adjust the volume and scroll through the menus. 3 Lock Icon indicates that the keypad is locked because the earpiece is down. 4 Smart Key border and word that defines the Name Indicator current operation of the Smart Key . 5 Smart Keys™ are used in context with the text display.
Display Indicators Display indicators are located at the top of the display. Different indicators appear based on the phone’s operating mode. Digital Indicates that you are Indicator receiving a digital signal. Signal Indicates current signal strength. More lines means better signal strength. No Service The phone is not receiving a signal from the system. In Use The call is in progress. No Icon The phone is in standby. Roaming The phone is outside of its home area.
Using the Battery The phone comes with a rechargeable battery pack. The battery pack is shipped with approximately 50% capacity so you can use it immediately after purchasing the phone. Remember to charge the battery as soon as possible in order to maximize the talk time and standby time. Installing the Battery Remove the battery cap before installing the battery. 1. Press down on the battery release latch and simultaneously slide the back cover down and out. 2.
4. Replace the back cover by sliding it up toward the battery release latch. Removing the Battery 1. Turn the power off; Otherwise, you may lose stored numbers and messages. 2. Press down at the battery release latch and simultaneously slide the back cover down and out. 3. Hold the battery pack at the bottom right corner and pull up and out at a 45° angle.
Turning the Phone On and Off Turning On Make sure that the charged battery pack has been installed in the back of the phone or that you have external power (using the cigarette lighter adaptor or car kit). 1. Raise the earpiece. 2. Press for a few seconds until the red light at the top of the earpiece is lit. Turning Off 1. With the earpiece raised, press for a few seconds until “Powering Off” is displayed. 2. Release . 3. Lower the earpiece. When the power is off, nothing displays on the screen.
Antenna Raise the antenna for best voice quality.
Charging the Battery The battery charge level is shown at the top right of the display. When the battery charge level becomes low, the low battery sensor will alert you by displaying the screen icon and sounding an audible tone. If the battery level becomes too low, the phone will switch off and any function in progress will not be saved. Batteries may be charged using the standard QUALCOMM desktop charger, optional travel charger, or cigarette lighter adaptor.
BASIC FUNCTIONS Function Keys The following keys perform these functions when pressed during most procedures: Clears characters from the screen. Press once to erase one digit or character. Press and hold to erase all digits. When in a menu, press once to go back one level and press and hold to go back to the standby display. Disconnects a call. Also exits all the way out of a menu back to the phone’s most basic standby display without changing the setting.
Making a Call First, check that your phone is on. The display indicators should be visible on the screen. 1. Raise the earpiece. 2. Enter the phone number. 3. Press . If the phone is locked, the number is restricted, or there is another problem, you will see a help message. 4. Press the call. or lower the earpiece to disconnect Correcting Dialing Mistakes Press to erase one digit at a time. Press and hold for at least one second to delete all digits or letters.
Receiving Calls Your phone must be on to receive calls. The earpiece may be up or down. If the earpiece is down: Raise the earpiece. Or if the earpiece is already up: Press any key (except to answer. or the volume keys) To disconnect the call: Press or lower the earpiece. Call Waiting Your service provider may offer call waiting. When you are in a call, you may hear two beeps indicating another incoming call. 1. Press to access this call. 2. Press again to toggle between the two callers.
Redialing Calls Redialing Last Outgoing Number 1. Press to redial the last outgoing call. Redial Last Ten Calls You can redial any of your last ten calls through the call history list. See the Phone Book section.
Saving and Editing Emergency Numbers 1. Press under [MENU]. 2. Press for Security menu. 3. Enter the lock code. The lock code is typically set to either 0000 or 1234 as a default. 4. Press for Emergency #. 5. Press under [EDIT] to make changes to the first emergency number. or Press under [NEXT] to see the next emergency number. Signal Strength The quality of the call depends on the signal strength in your area.
Power Save Mode The power save mode feature will automatically turn on if the phone has not been able to acquire any systems after 15 minutes of searching. While this feature is active, the phone’s battery charge is conserved. The phone will automatically recheck for service periodically. To manually force the phone to recheck for service, press any key or raise the earpiece. A message on the display will indicate when the phone is operating in power save mode.
PHONE BOOK FEATURE The Two Phone Book Types You should be familiar with the basic functions of the phone before using the phone book. There are two types of phone books: primary phone book memory and recent call history list. Primary Phone Book Memory The phone has 99 general use phone book memory locations where you can store entries of up to 32 digits with an associated name up to 12 characters. Recent Call History List The phone keeps a list of the last 10 calls you made, accepted, missed, or added.
• While viewing a call history entry, press to show additional information available such as the time stamp. Saving Numbers to Your Primary Phone Book Memory locations 1 to 9 should be used for onetouch dial or most commonly used phone numbers. 1. Enter the phone number that you want to save. [SAVE] will then appear. 2. Press under [SAVE]. 3. Enter a name to go with the number. Press the key labeled with the letter you want.
5. Press under [OK] to store the number in the first available storage location. or Enter a specific, two digit location number. 6. Press under [OK] to save the number. or Press under [NEXT] and then under [OK] to save the number as secret. (Secret numbers do not display on the screen.) Retrieving Numbers from Your Phone Book Press under [BOOK] to access the phone book. Retrieving all Manually Stored Memory Locations 1. Press 2. Press under [BOOK]. or to scroll through the memory list.
3. Press under [VIEW] to see what is in that memory location. 4. Press under [ERASE] or [EDIT] or press to call. Retrieving One Entry by Memory Location Number 1. Press under [BOOK]. 2. Enter the two digit memory location number. You will then see what is in that memory location. 3. If occupied, to call or press under [ERASE] or [EDIT]. Retrieving by Name Search 1. Press under [BOOK]. 2. Press under [NAME]. 3. Enter the letter(s) that you want to look for. 4. Press under [FIND].
Retrieving Recent Call History 1. Press under [BOOK]. 2. Press under [CALLS]. 3. Press or to scroll through the last ten calls. 4. Press to place a call. or Press call. under [VIEW] to see specifics of the 5. Press under [SAVE] to save the number to a memory location. If the number already has a name associated with it, it is already entered into a memory location. While viewing an entry, press to show additional information available such as the time stamp.
Changing Your Phone Book Erasing a Stored Memory 1. Press under [BOOK]. Recall and view the memory location. 2. Press under [ERASE]. This will erase the name and number from the memory location leaving it free for a future entry. 3. Press under [OK]. 4. “-erased-” will flash on the display to confirm that the entry has been erased. Editing a Stored Memory Location 1. Recall the memory location. 2. Press under [EDIT]. 3. Edit the number using the digit keys, and 4. Press under [OK]. 5.
Dialing Numbers from Your Phone Book You can make a call using any memory location either by speed dialing from the list or by pressing while viewing the full contents of the memory location. Speed Dialing You can quickly dial numbers that are saved in your phone’s phone book. 1. Press the key(s) that correspond to the numeric memory location. For example, for memory location 10, Press under [BOOK], and then press . 2. Press .
Dialing from a Memory List 1. Press under [BOOK]. 2. Press or to go to the memory location you want. 3. Press . Dialing from within a Memory Location While viewing any memory location, press . Advanced Phone Book Features Pause Feature When you call automated systems (such as voice mail or credit card billing numbers), you often have to enter a series of numbers. Instead of entering the numbers by hand, you can store the numbers in your phone book separated by special characters called pauses.
or Press for TimePause. 4. Enter additional numbers (i.e., pin number, credit card number). 5. Press under [SAVE]. Note You can press for Hyphens. Hyphens are used for appearance only; the phone dials the number without any delays. Punctuation Characters for Name Entry You can use any of the 18 special characters while you are entering names during phone book storage or editing. 1. Press during the “Enter Name” step. You will then see a list of characters. 2.
Case Changing During Name Entry When entering a name, you can use both upper and lower case letters. 1. Press under [A->a] to change case. 2. Enter letters. “Prepending” a Stored Number “Prepend” is used if you are out of your home system and need to add the area code to an existing phone book number. When a phone book entry, call history entry, or messages callback number shows up on the display, you can make additions to the beginning of the original number.
MENU FEATURE Main Menu This section describes the various menu items. An arrow to the right of the title indicates if there is more information before (↑) or after (↓) that particular number. The main menu looks like the following: Menus allow you to check or change the phone’s various features and settings. You may see the different menus using either the menu access method or the shortcut menu access method. Menu Access Method 1. Press the 2. Press under [MENU].
5. Press under [NEXT]. or Press or to cycle through the possible settings. A check mark indicates the current option selection. 6. Press under [OK] to save the setting. 7. Press to cancel without saving. Shortcut Menu Access Method Each menu feature can also be quickly accessed by pressing under [MENU] and the numbers on the desired menu screen. For example, when the shortcut is used, the phone displays the current menu item setting.
2 Key Beep Adjust the key beep volume (the sound the phone makes when the keys are pressed with the or keys or volume keys). Possible settings: silent, low, M-, M+, high. 3 Earpiece Adjust the earpiece volume with the , keys or volume keys. You can also adjust this during a call by pressing only the volume keys. Possible settings: low, M-, M+, high. 2 Call Info This allows you to see the number and duration of various kinds of calls. 1 Last Call Display duration of last call in minutes and seconds.
4 All Calls Display the total number of calls and time (minutes and seconds) including calls made while in the home system and while roaming. This is NOT resettable. 3 Security You must enter the lock code to see what is in the security menu. Typical default values are either the last 4 digits of your phone number or 0000. 1 Lock Mode Choose when you want the phone to lock. Possible settings: “on power up,” “now,” “never.” “Now” immediately locks the phone.
4 Emergency# Enter three emergency numbers. You can call these numbers and 911 even when the phone is locked or restricted. If dialing the number, it must exactly match one of these programmed numbers for it to override the lock and restriction settings. 5 Clear Calls Clear the call history information. 4 Features 1 Auto Answer Select the number of rings before the phone automatically answers a call. Possible settings: “5 rings,” “3 rings,” “1 ring,” and “off.
5 Key Beep Set key beep length and touch tone playback speed. Possible settings: “long,” “normal.” 6 One-touch Enable/disable one-touch phone book memory dialing. Possible settings: “enable,” “disable.” 7 Privacy Set the voice privacy feature for CDMA calls. Possible settings: “enhanced,” “standard.” CDMA offers inherent voice privacy. Check with your service provider for availability of the enhanced voice privacy mode.
“On when earpiece up” causes the backlight to turn on (and remain on) only when the earpiece is up. “Always on” means that the backlight is on whether the earpiece is up or down. Choosing “always on” significantly increases battery drain. “Always off” means that the backlight is never on. 2 Banner A banner enables you to personalize your phone by displaying your name, for example. Enter the banner (up to 12 characters) that will display on the top line when the phone powers up and when it is in standby.
6 Alerts 1 Fade Set an alert to inform you when you have lost a call or lose service. Possible settings: “on,” “off.” 2 Minute Set minute minder to beep every 10 seconds before the minute while in a call. 3 Service Set an alert to beep when a network service parameter changes. 7 System This allows you to set some of the PCS network settings. 1 Set NAM Select the phone’s NAM (Number Assignment Module) if the phone is registered with multiple service providers.
PAGING, MESSAGING, AND VOICE MAIL This feature allows your phone to receive messages when it is turned on. A single key, , allows you to access your messages while a four line display provides for easy viewing. While reading a message, you can return a call to the callback number provided in the message simply by pressing twice. Messages are stored in the phone’s memory and are not erased when the phone is turned off. The phone has the capability of storing up to 23, 40 character messages.
Voice Mail indicates the number of new Notification voice mail messages that your voice mailbox has. You must call your voice mail number to listen to these messages. New Message Alert The phone will notify you of a new message by a display on the screen, five short beeps (if enabled), a flashing red light on the earpiece, and by turning on an icon on the top of the display. If a message is marked URGENT, the corresponding icon ( or ) will flash.
Viewing Pages and Messages These messages may consist of a time stamp, a callback number, a name (if the callback number matches a phone number stored in a memory location), and text. They are accessed as text type messages as shown below. Reading New Messages 1. Press . The display will then show the number of new messages. 2. Press under [TEXT]. You will see the messages in the order they were received except for all urgent messages, which will be displayed first.
Note When there are no new messages, the phone will display a list of previous messages. If the callback number has not been previously stored into one of the phone’s memory locations, you can do so by pressing under [SAVE]. If a name appears with the callback number, the number is already stored in a phone memory location. After storing the number in phone book memory, the phone returns to the callback screen. Press to place the call.
5. While viewing a message or with the arrow pointing to the desired message, you can press to place a call to the callback number provided in the message. After you see the callback number on the display, press again to place the call. 6. Press under [QUIT]. This brings you back to the list of previous messages. Voice Mail Notifications Voice mail notification indicates the number of new voice mail messages in your mailbox.
or Press under [ERASE] to erase the message and turn the icon off. Usually, this is not required because the network will command the phone to automatically turn the icon off when you have no new messages. Low Memory Warning The phone will alert you when the amount of available message memory is less than 25%. Although the phone can still receive new messages, you should erase messages you no longer need to avoid running out of memory.
ACCESSORIES You can purchase a number of accessories for your QCP 800 or QCP 1900 phone, including batteries, chargers, and a hands-free car kit. For our full line of accessories, visit our Accessories Store at ■ www.kyocera-wireless.
PHONE SAFETY AND CARE Background The hand-held portable personal communication service telephone is one of the most exciting and innovative electronic products ever developed. With it you can stay in contact with your office, your home, emergency services etc. Your personal communication service telephone is a radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) energy.
In March 1993, The U.S. Federal Communications Commission (FCC) proposed the adoption of this updated standard. The design of the QCP 800/QCP 1900 phone complies with this updated standard. Of course, if you want to limit RF exposure even further than the updated ANSI Standard, you may choose to control the duration of your calls and operate your phone in the most power efficient manner.
Caring for the Battery For best battery performance, follow these guidelines: • Only use QUALCOMM battery packs, model number TABAT0001, and QUALCOMM chargers, model numbers TATVL0001 or TADTC0002. Do not use any other battery pack or charger. QUALCOMM’s chargers are designed to maximize the battery life performance. • Do not charge the battery pack in temperatures outside of 32°F to 122°F (0°C to 50°C) because damage could occur.
Driving Safety Talking on the phone while driving is extremely dangerous and is illegal in some states. Remember, safety comes first. Check the laws and regulations on the use of PCS phones in the areas where you drive. Always obey them. When using the phone in the car: • Give full attention to driving. • Use hands-free operation. • Pull off the road and park before making or answering a call. If you must use the phone while driving, please use one-touch, speed dialing, and auto answer modes.
RF energy may affect improperly installed or inadequately shielded electronic operating and entertainment systems in motor vehicles. Check with the manufacturer or its representative to determine if these systems are adequately shielded from external RF energy. You should also check with the manufacturer of any equipment that has been added to your vehicle. Consult the manufacturer of any personal medical devices (such as pacemakers, hearing aids, etc.
Blasting Areas To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off two-way radio.” Construction crews often use remote control RF devices to set off explosives. Potentially Explosive Atmospheres Turn your phone OFF when in any area with a potentially explosive atmosphere. It is rare but your phone or its accessories could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
WHERE TO FIND HELP contact your service provider first. Your service provider’s customer support department can answer questions about your phone, Your Service Provider For questions about your phone and phone service, contact your service provider. Your service provider’s customer support department can answer questions about your phone, phone bill, call coverage area, and specific features (such as call forwarding or voice mail) available to you.
Before requesting support, please try to reproduce and isolate the problem. When you contact the Customer Care Center, be ready to provide the following information: ■ ■ ■ ■ The name of your service provider The actual error message or problem you are experiencing The steps you take to reproduce the problem The Electronic Serial Number (ESN) and Part Number (MCN) of the phone. The ESN usually starts with a “B” and the MCN usually starts with a "61-.
INDEX A AC adaptor 15 accessories 5, 48, 52 aircraft 51 alerts 39 fade 39 minute 39 service 39 setting 39 answering a call 7, 9, 18, 36, 50 Antenna 9, 14 antenna 6, 20, 48, 51 Auto NAM 39 automatic answer 36 automatic hyphenation 38 automatic redial 5, 36 automatic retry 36 automatic scrolling 42, 44 B backlight 37, 38 banner 38 battery care 49 charge 21 charging 11, 15 drain 38 installing 11 level indicator 10, 15 removing 12 55
use 11 best performance 20, 48 blasting areas 52 C call history 19, 22, 26, 31, 36 call info 34 call waiting 9, 18 calls credit card 29 dialing 28, 29, 36 ending 9 incoming 9, 18, 22, 35 making 7, 17, 19, 50 receiving 18 redialing 19, 36 restrictions 35 roaming 10, 34, 35 three-way 9, 18 car kit 13, 36 CDMA 5, 37 children 51 cigarette lighter adaptor 13, 15 clear calls 36 digits 9 clear digits 16 Code Division Multiple Access 5, 37 correcting dialing mistakes 17 customer service 6 D dialing calls 19, 28,
driving safety 50 E earpiece 5, 7, 9, 13, 17, 18, 19, 21, 33, 34, 36, 37, 41 editing 30 memory 27 numbers 20 emergency numbers 19, 20, 35, 36 END key 9 ending a call 9 entering a number 17, 23, 24, 25, 29, 36 letters 25 lock code 20, 35 lower case letters 31 name 23 punctuation 30 explosive atmospheres 52 F fade alert 39 FCC 6, 48, 51 features 5, 7, 9, 19, 22, 29, 32, 36 frequency 47 Functions 16 functions 16, 19 I incoming calls 9, 22, 35 INFO key 9 K key beep volume 34 keypad lock 5, 7, 9 57
L last ten numbers dialed 19, 26 lock code 35 low battery 15 M manual pauses 29 memory clearing 27 editing 27 effect 15 locations 5, 22, 25, 26, 28, 31 retrieving 24 storage 40 menu item descriptions 33–54 method 32 options 32 shortcuts 33 message text 10 voice 10 message key 9 messages 40–54 minute alert 39 mute 36 muting voice 36 N NAM 39 no service 10 Number Assignment Module 39 O one-touch dialing 28, 37 own phone number 17 58
P pages 10, 40 pause dialing 29 performance tips 48 phone book 22 advanced features 29 dialing from 28, 37 editing 27 retrieving from 24 saving numbers to 23 phone number viewing your own 17 power 12, 47 POWER key 9 power key 9 power save mode 21 powering off 13 powering on 13 R radio frequency energy exposure 47 recalling last number dialed 19 recalling memory locations 24–26 recalling previously dialed numbers 26 Receive Signal Strength Indicator 10, 20 receiving calls 9, 18 receiving messages 41 red lig
scratch pad 22, 36 scroll through messages 44 through stored names 25 through stored numbers 26 scroll keys 9 searching for names 25 for numbers 24, 25, 26 secret numbers 24, 31 signal strength 10, 20 Smart Keys 9, 16 speed dial 5, 28, 50 standby time 11 storing names with numbers 23 numbers 20, 23–24 secret numbers 31 T TALK key 9 talk time 11 timer last call 34. See also call info roaming 34. See also call info total 35.