Operation Manual

Introduction Getting Ready Taking Pictures Playback Set Up
EN-154
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
3 Use the D-connector cable to connect the
USB cradle holding the camera to the
television, then turn the television on.
4 Turn the camera on.
Images are displayed on the television.
The table below shows the operations that can be performed during
playback.
Displaying Information (File No Display)
«Applicable images: Still images / movies»
You can check information such as the filename and number of pixels of an
image during playback.
1 Move the selector lever up u while
playing back an image.
The information for the displayed image appears.
A Important
Push the D3 connector cable on until the clips on
the right and left sides of the D3 video connector
click into place.
Operation Description
Selector lever up u Switches to the File No display.
(Æ p.24
)
Selector lever left l Displays images in reverse order.
Selector lever right r Displays images in forward order.
A Important
• The LCD monitor turns off while the D-connector cable is connected.
• Images may sometimes not be displayed correctly on a television.
BNote
[M] and [y] are displayed for movies and still images with postrecorded audio.
BNote
• Refer to p.24 for details of the screen displayed.
• Press the MENU button K when information is displayed to return to the normal
playback screen.
100–KICX_0001 2272X1704 2004.09.01 12:34:56