Operation Manual

Introduction Getting Ready Taking Pictures Playback Set Up
EN-179
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
[VIDEO OUT] Setting the Output Format for a TV Connection
You can choose between NTSC and PAL video output formats when the
camera is connected to a television through the VIDEO OUT port on the
USB cradle. Different TV signal formats are used in different countries.
When you are on holiday, you should configure the video output to match
the format for your destination country.
1 Turn the camera on and press the mode
button D until "G" lights up on the mode
select LED.
2 Move the selector lever up u or down d
to select [VIDEO OUT], then move the
lever right r.
3 Move the selector lever up u or down d
to select the video output format, then
press E.
The selected setting is applied.
[NTSC]: Video output format used in, for instance, Japan and the U.S..
(Default)
[PAL] : Video output format used mostly in Europe.
BNote
If the D connector cable is connected, the camera will automatically switch to D3 output
format regardless of this setting.
BNote
This setting is retained when you turn the camera off.
VIDEO OUT
STARTUP MODE
DISPLAY INFO
FILE NO.
MODE RESET
NTSC
STILL
ON
EXECUTE
EXECUTE
SET UP(3/3)
VIDEO OUT
STARTUP MODE
DISPLAY INFO
FILE NO.
MODE RESET
NTSC
PAL
ON
EXECUTE
EXECUTE
SET UP(3/3)