Installation guide

LE 04 Maintenance LE 04 Maintenance
System settings
Activity
Recommendation
Entry in the service settings (Adjustment/Maintenance).
• If the copier or print quality is bad.
• If you need a detail report of the technical settings (for technician).
• For settings of the fax connectivity.
• For special settings (by moving location or replacing units).
System
settings
Tip
• Detailed information in the operation guide (^ÇàìëíãÉåíLj~áåíÉå~åÅÉ).
• Some settings are only available for the administrator.
• Default User and Password is the print speed followed up with 2 zero
2500 2500 FS-6025MFP
3000 3000 FS-6030MFP
2500 / 3000
2500 / 3000
Density Adjustment
Copy
Set‘s the brightness of the copy in 7 steps.
Possible value: -3 (light), -2, -1, 0 (normal), 1, 2, 3 (dark)
Send/Box
Adjust scan density when sending or storing the data in Document Box in 7 steps.
Possible value: -3 (light), -2, -1, 0 (normal), 1, 2, 3 (dark)
Background density
Copy (Auto)
Copy
(Auto)
Darkens or lightens overall background density adjustment during copying. Adjustment in 7 steps
Possible value: -3 (light), -2, -1, 0 (normal), 1, 2, 3 (dark)
Send/Box (Autom.)
Darkens or lightens overall background density when sending images or storing them in the
Document Box. Adjustment in 7 steps
Possible value: -3 (light), -2, -1, 0 (normal), 1, 2, 3 (dark)
Toner Save Level (EcoPrint)
Co
py
/ Print
py
Darkens or lightens overall EcoPrint appearance during copying or printing. Adjustment in 5 levels.
Value: 1 to 5
Print Density
Adjust print density. Adjustment in 5 levels.
Value: 1 to 5