User manual
Table Of Contents
- Table of Contents
- Introduction
- Set Up Your Phone
- Basic Operations
- Your Phone’s Home Screen
- Phone Calls and Voicemail
- Contacts
- Messaging
- Internet and Social Networking
- Global Services
- Activate Sprint Worldwide Service on Your Account
- Your Phone’s SIM Card for International GSM Roaming
- Enable Global Roaming Mode
- Set the Communications Method for Global Use
- Select a Carrier
- Make and Receive Worldwide Calls
- Sprint International Voicemail Service
- International Data Roaming
- Contact Sprint for Assistance with International Service
- Connectivity
- Camera and Video
- Productivity
- Entertainment and Activities
- Wireless & Networks Settings
- Device Settings
- Personal Settings
- System Settings
- For Assistance
- Cleaning and Drying Procedures
- Copyright Information
- Index
Connectivity 117
3. Tap the ON/OFF switch to turn Wi-Fi on .
Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
To disable Wi-Fi, tap the switch again .
4. Tap a Wi-Fi network to connect, enter the password (if it’s not an open network), and then tap
CONNECT.
Your phone is connected to the Wi-Fi network. You will see ( ) in the status bar.
The password, for a household wireless LAN router, is sometimes found on a sticker on the
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
Entering a password is not required if an access point is not security protected.