User Manual

24 2A. Phone Basics
Plus (+) Code Dialing
When placing international calls, use Plus Code Dialing
to automatically enter the international access code for
your location (for example, 011 for international calls
made from the U.S.).
1. Press and hold to display “+” on your phone
screen.
2. Enter the country code and phone number, and
then press . (
The phone automatically prepends
the access code for international dialing, followed
by the country code and phone number.)
Speed Dialing
You can store up to 98 numbers in your phone’s speed
dial memory to make contacting friends and family
easier.
You must have already assigned a speed dial number
to an existing phone number. See “Assigning Speed
Dial Numbers” on page 58.
To use speed dial for locations 2-9:
䊳 From standby mode, press and hold the
appropriate key for approximately two seconds.
To use speed dial for locations 10-99:
䊳 From standby mode, enter a two-digit speed dial
number, and then press .
The display confirms that the number has been dialed
when it shows “Connecting...”.
Note: Speed dialing is not available when you are roaming;
when you are roaming off the Nationwide Sprint
Network, you must always dial using eleven digits (1+
area code + number).