User's Guide

Sprint Direct Connect 43
Reply to a Call Alert
Call Alerts continue to repeat for a set amount of time (default is five minutes) or until you return
the call or dismiss the alert. You can adjust the default time in the Settings > DC Settings >
Call Alerts > Repetition > Repeat menu.
1. With the Call Alert displayed, press and hold the DC button to return the call.
2. Continue with the Direct Connect call as previously detailed.
To dismiss a Call Alert:
ʇ Press IGNORE (right softkey).
Group Connect
A Group Connect call is a Direct Connect call made to up to 20 Direct Connect users with Sprint
phones nationwide at one time. You can make a Group Connect call in several different ways:
ŏ By setting up a group entry in Contact on your phone.
ŏ By using the Sprint Mobile Sync tool available at sprint.com. See Sprint Mobile Sync.
ŏ By selecting or entering multiple numbers for a one-time call.
For information on creating groups and storing them in Contacts, see Create a Group Entry.
Important: When making a Group Connect call or creating a group list for Group Connect
calls in Contacts, you must select an entry’s DC-capable number. If you select
a non-DC-capable number, the name will be added to the list, but Group
Connect calls will not go through to that group member.
Make Group Connect Calls
Group Connect Call Information
Make Group Connect Calls
You can make Group Connect calls by selecting saved groups from your Contacts, selecting
from group calls saved in History, or by creating groups for one-time use.
Make a Group Connect Call From Contacts
1. In standby mode, press CONTACTS (right softkey).
2. Highlight a group and press the DC button to begin the Group Connect call.
3. Continue the Group Connect call in the same manner as a one-to-one Direct Connect
call.
Note: Only one person at a time may speak on a Group Connect Call.