Product Info

8 Important Safety Information Important Safety Information 9
• Make sure the headset jack, the USB/Charger port, and
the battery covers are properly seated, with no foreign
objects obstructing the seals.
• Do not spray or immerse your phone in liquids other than
fresh water or tap water, such as detergent, beverages,
or chlorinated or treated water. Certain liquids such as
salt water and chlorinated water are corrosive over time.
Should your phone be accidentally exposed to other
liquids, rinse the phone gently in clean fresh water.
• Do not expose your phone to water heated in excess of
104° F (40° C).
• Your phone is inoperable under water and should be
dried as quickly as possible when wet.
• Do not use the USB/Charger port for charging, data
transmission, etc. until the phone is completely dry.
• Do not use the headset jack to plug in an accessory until
the phone is completely dry.
If your phone gets wet:
Water in the phone’s open microphone and speaker
ports may affect outbound audio quality and speaker
performance. These are temporary conditions and will
subside once the phone is dry.
1. Do not open the headset jack, the USB/Charger
port, and the battery covers as this may allow
water to get inside the sealed portion of the phone.
2. Wipe the phone surfaces with a dry clean cloth.
3. Water in the phone’s open microphone and speaker
ports (small holes located at the top and bottom,
and the grid of holes along the bottom front of the
phone) should be removed with puffs of air directly
into the ports. Phone audio may not operate properly
until ports are dry. Apply a dry clean cloth to the
open areas and crevices to remove the moisture left
on the phone: microphones; speakers; all physical