Operation Manual

10-10
Troubleshooting > Troubleshooting
Printouts are fuzzy. Is the machine being used in conditions
of very humid, or humidity or
temperature rapidly changes?
Use in an environment that has suitable
humidity.
―
― Select the [
Menu ] key > [ Adjust/Maint. ]
> [
Service Setting ] > [ Drum ], and then
select [ Yes ].
―
― ECOSYS P7040cdn: Select the [
Menu ]
key > [ Adjust/Maint. ] > [ Service
Setting ] > [ Drum Heater ], and then
select [
On ].
NOTE
This function cannot be turned on in
some regions.
―
Images are skewed. Is the paper loaded correctly? Check the position of the paper width
guides.
page 3-4
Irregular horizontal lines
appear in the image.
― ECOSYS P6035cdn: Select the [ Menu ]
key > [
Adjust/Maint. ] > [ Service
Setting ] > [ MC ] and increase the
adjustment value. Increase the
adjustment value 1 level at a time from
the current value. If there is no
improvement after the value is
increased by 1 level, increase by 1 level
again. If there is still no improvement,
return the setting to the original value.
―
The altitude is 1000 m or
higher and irregular
horizontal white lines appear
in the image.
― Select the [ Menu ] key > [ Adjust/Maint. ]
> [ Service Setting ] > [ Altitude Adj. ],
and set to an elevation one level higher
than the current setting.
―
The altitude is 1000 m or
higher and dots appear in
the image.
― Select the [ Menu ] key > [ Adjust/Maint. ]
> [ Service Setting ] > [ Altitude Adj. ],
and set to an elevation one level higher
than the current setting.
―
Symptom Checkpoints Corrective Actions
Reference
Page