Specifications

10-8
Appendix > Optional Equipment
Optional Applications
Overview of the Applications
The applications listed below are installed on this machine.
Starting Application Use
Use the procedure below to start using an application.
1 [ Menu ] > [▲] [▼] key > [ Op functions ] > [►] key
2 Enter the administrator ID and select the [ OK ] key.
3 Enter the administrator password and select the [ OK ] key.
4 Select [ Details ] of the application you will start using, and select the [►] key.
5 [▲] [▼] key > [ Official ] > [ OK ] key > [ OK ] key
To use the application as a trial, select [ Trial ] without entering the license key.
Application
Data Security Kit
Card Authentication Kit
*1
*1 This can be used on a trial basis for a limited time.
ThinPrint Option
*1
NOTE
• Restrictions such as the number of times the application can be used during the trial period differ depending on the
application.
• If you change the date/time while using the trial version of an application, you will no longer be able to use the
application.
NOTE
Enter an ID consisting of between 1 and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator ID is 3000.
NOTE
Enter a password consisting of between 0 (no settings) and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator password is 3000.