- MITA AMERICA, INC. Operation Guide FAX SYSTEM

Section 9 Reference Information
9-10
CODE
CAUSE AND/OR PROCEDURE FOR CORRECTION
U09000
U12000
U14000
U14100
U19000
U19100
U19200
U19300
U19400
Communication was attempted but, but was unsuccessful because the other party’s FAX does not match the
communication protocol in use (the other party is using a G2 facsimile).
An F-Code Based Relay Broadcast Transmission command was received, but all the data to be transmitted was not
received because the memory in your FAX machine has become full. Check the contents of your machine’s memory
and, after you have created sufficient space in memory, have the initial transmitting station perform the transmission
operation again.
A reception from an F-Code box was attempted, but was unsuccessful because the memory in your FAX machine has
become full. Print out data from memory and try again or abandon the F-Code Based Confidential Reception attempt.
The destination FAX is one of our models and a transmission to a destination party’s F-Code Box was attempted,
but was unsuccessful because memory in the destination party’s FAX machine has become full.
Memory Reception was attempted, but was unsuccessful because your memory has become full.
Clear your memory of all other data and attempt reception again.
Transmission was attempted, but was unsuccessful because the destination party’s memory has become full.
Check with the destination party.
The data stored in memory is faulty. Perform the necessary communication procedures again.
A transmission was attempted, but was unsuccessful because the data to be transmitted is faulty.
Perform the transmission procedure again.
A reception was attempted, but was unsuccessful because the received data is faulty. Perform the reception procedure
again.