- MITA AMERICA, INC. Operation Guide FAX SYSTEM

1-26
Section 1 Fax Operation (Basic Use)
5
(Inch)
(Metric)
6
7
9
10
(Inch)
(Metric)
(Inch)
(Metric)
11
12
Use the keypad to enter the fax number you want to register
under that one-touch key. (Maximum 32 digits)
• “r” and “R” cursor keys...Use to move the cursor.
“Delete” key...Touch to delete the character that the cursor is
currently under. (When the cursor is at the last space, the
previous character will be deleted.)
“Space” key...Touch to enter a space.
“Pause” key...Touch to enter a slight pause (indicated by a
hyphen) at that point in dialing.
Touch the “Next” key.
Enter the name of the other party. (Maximum 20 characters)
* In order to enter characters, refer to “Entering Characters”
on page 1-23.)
Check the registered information. If you want to change any
portion of it, touch the key that corresponds to the desired
item and change the information as desired.
If you want to perform more detailed settings like selecting the
transmission speed, or designating this one-touch key for
F-Code Based Communication or Encrypted Transmission,
touch the “Setting” key and then go to the next step.
If you want to register this one-touch key with the entered
information as is, go directly to step 20.
Select the desired transmission speed from among those
available: “33600bps”, “14400bps” and “9600bps”.
If you want to designate this key for F-Code Based Communi-
cation, touch the “Subaddress Tx” key and then go to the next
step.
If you want to designate this key for Encrypted Transmission,
go directly to step 15.
If you want to register this one-touch key with the entered
information as is, touch the “Close” key and proceed directly
to step 20.
To use this key for F-Code Based Communication, touch the
“On” key. The Subaddress/Password Input screen will appear.
8