- MITA AMERICA, INC. Operation Guide FAX SYSTEM

Section 4 Other Features of this Fax
4-7
(Inch)
(Metric)
(Inch)
(Metric)
7. Touch the “Confirm” key.
If you selected “Overwrite”, the message display will return to the
same screen as was displayed in step 4.
8. Select any related transmission settings that you want to use.
* If the optional Duplex Document Processor is installed and you
are using duplex (2-sided) documents, touch the “Duplex TX” key.
Refer to “Duplex Transmission” on page 2-1 for setting proce-
dures.
9. Press the Start key. The documents will be scanned and stored in
memory where they will awaiting the polling request.
(2) Polling Reception
In Polling Reception, the receiving party dials the number of the
transmitting fax, triggering transmission of the documents set in that
other fax machine. If reception of documents from more than one
transmitting fax is designated, those destinations will be dialed in
order and reception will be carried out from each fax. It is possible for
the receiving party to use the timer to have the documents received at
a time convenient to them.
* If you enter all of the transmitting fax numbers using abbreviated
numbers, one-touch keys and/or group dial keys, this fax can
automatically receive documents from up to 300 different fax
machines in a single operation. However, you CANNOT enter the
number of a transmitting fax with abbreviated numbers or one-touch
keys that have been designated for Encrypted Transmission.
* Polling Reception is only possible if the transmitting parties have
first performed the necessary Polling Transmission operation.
(Refer to “(1) Polling Transmission” on page 4-6.)
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1. Touch the “Application” key. The Application screen will appear.
2. Touch the “RX Polling” key.