- MITA AMERICA, INC. Operation Guide FAX SYSTEM

4-28
Section 4 Other Features of this Fax
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(3) Using a Program Key
1. If the operation involves the transmission of documents, set the
documents you want to transmit. If it involves a polling reception,
go directly to step 5.
2. If you want to change the transmission conditions, such as the
resolution and contrast, touch the “TX setting” key. If you do NOT
want to change the current conditions, go directly to step 5.
3. Touch the key that corresponds to the desired item and change the
information as desired. (To change each transmission condition,
refer to pages 1-16 and 1-17.)
4. Once you are finished changing transmission conditions, touch the
“One touch destinat.” key.
5. Touch the program key under which the desired program is
registered.
6. Press the Start key.
The transmission or reception operation, as appropriate, will begin
automatically.
(4) Printing Out a Program Dial List
Print out this list in order to check the content of program keys
currently registered in this fax.
* If there are no program keys registered in this fax, a Program Dial
List will not be printed out.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1. Touch the “Print Report” key. The Report Select screen will appear.
2. Touch the “Program dial list” key.
3. To print out a Program Dial List, touch the “Yes” key. A Program
Dial List will be printed out.