Operating Instructions
Introduction Getting Ready
Taking Pictures
Playback Set Up
GB-67
Taking Still Images
|
Using Continuous Shooting Mode
|
Shooting Movies
|
Selecting Scenes to Automatically Set the Focus and Flash
|
[
k
] Using Self-Timer
|
Using Zoom (Wide-angle and
Telephoto)
|
Using Flash
|
Adjusting Brightness
|
Setting Focus
|
Displaying Information on the LCD Monitor
|
Selecting the Number of Pixels (Image Size) and the Quality
|
Adjusting Image
Colors and Other Settings
|
Switching Display Screen (Electronic Viewfinder and LCD Monitor)
|
Setting the exposure and focus during continuous shooting (Drive mode)
NEXTBACK
Contents (Top page) Detailed Contents Index Nomenclature Menus and Settings Troubleshooting
[FOCUSING] Selecting the focusing method
«Applicable modes: S / I / M»
You can select either of 2 automatic focusing modes: [WIDE AF] or [SPOT
AF].
[WIDE AF] : Because this mode uses a wide focusing frame, it is useful for
shots such as photos of 2 people standing side by side.
(Default)
[SPOT AF] : Use this mode to focus on a specific part of your subject. You
should also use this mode when you use focus lock to take
pictures.
* When the subject you want to focus on is not inside the focus frame, use focus lock to set the focus. (See
"
Focusing Off-Center (Focus Lock)" on p.66.)
Subjects That Are Difficult to Focus On
The camera has difficulty focusing on the following types of subject. Lock the focus on another object at the
same distance from the camera as the desired subject and then take the picture.
• Low contrast subjects
• Objects that consist of the same pattern repeated
• Dark subjects
• Subjects made up only of horizontal lines
• Extremely bright or glossy subjects
• Subjects where there is a strong light source in or near the field of view, or when there is strong light
such as sunlight in the LCD monitor image
• When there are 2 or more subjects in or near the center of the field of view that are at different distances
from the camera
• Very fast moving subjects
A Important
Remove the lens cap before turning the camera on.