Specifications

Specifications
11-4 OPERATION GUIDE
Using Print Server (IB-110)
When the Print Server (IB-110) is connected, perform the following procedure.
Connect and set up the machine, refer to the Print Server's Set up Guide.
Loading Software
1
Follow steps 1 to 8 of Loading Software on page 3-2.
2
Select Custom Mode and click Next.
3
Select Network Port and click Next.
4
Click Select All and click Next. The installation program installs the software.
5
When the installation is complete, the Installation Completed Successfully
window is displayed. Click Finish to proceed to Setting Print Port on page 11-4.
Setting Print Port
1
The Kyocera Printer Installation Wizard window is displayed. Click Next.
2
Select Kyocera FS-1016MFP and click Next.
3
Select Create a new port and select KMprint Port from the drop down list.
4
Click Next. The KMprint Add Port Wizard window is displayed.
5
Enter the IP address and click Next.
6
Enter the Destination Printer Port Name "USB#### (# is an arbitrary character)" and
click Next.
7
Perform the procedures displayed on the installation wizard.
8
When the installation is complete, the Printer Installed Successfully window is
displayed. Click Finish to leave the install program and return to the disc main menu.
9
Open the Printer's Properties and confirm Enable bidirectional support of the Ports
tab is checked.