Installation guide

6-5
Default Setting (System Menu)
Timer Settings
Adjustment and Maintenance
Adjust printing quality and conduct machine maintenance.
Service Settings
Note If the Administrator ID entry display appears, use the numeric keys to enter the Administrator ID (4 digits). The
default setting is 2500 for the FS-1025MFP, FS-1125MFP and FS-1325MFP, 2000 for the FS-1120MFP and
FS-1320MFP.
For details of Administrator ID, Administrator ID on page 6-6.
Item Description
Sleep Timer Auto Sleep automatically switches the machine into Sleep if left idle for a preset time. Set
amount of time before entering Sleep.
Value: 1 to 240 minutes (1 minute increments)
This can also be set from your computer. For details, refer to Configuration on page 2-48.
Auto Panel Reset If no jobs are run for a certain period of time, automatically reset settings and return to the
default setting. Set whether or not Auto Panel Reset is used, and the time until reset takes
place after the last job.
Value: Off, On (5 to 495 seconds (every five seconds))
Power Off Rule For each connection type (Network, FAX, USB Cable), set whether the power automatically
turns off when not used.
If you select On (the power automatically turns off), set the time in Power Off Timer which
appears next.
Value: Off, On
Network only appears on the FS-1025MFP, FS-1125MFP and FS-1325MFP.
FAX only appears on the FS-1120MFP, FS-1125MFP, FS-1320MFP and FS-1325MFP. If the
optional Fax kit is installed, note that turning the machine off at the main power switch
disables fax transmission and reception.
This can also be set from your computer. For details, refer to Configuration on page 2-48.
Power Off Timer The time until the power turns off can be set.
Value: 1 to 6 hours, 9 hours, 12 hours, or 1 day to 1 week
This can also be set from your computer. For details, refer to Configuration on page 2-48.
Err. Clear Timer If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses. For details, refer to Error Messages on page 9-8.
Value: Off, On (5 to 495 seconds (every five seconds))
Unusable Time Set the unusable time. For detail, refer to Unusable Time on page 7-35.
Note If the Administrator ID entry display appears, use the numeric keys to enter the Administrator ID (4 digits). The
default setting is 2500 for the FS-1025MFP, FS-1125MFP and FS-1325MFP, 2000 for the FS-1120MFP and
FS-1320MFP.
For details of Administrator ID, refer to Administrator ID on page 6-6.
Item Description
Maintenance Run this after replacing the Maintenance Kit.
New Developer Run this after replacing the Developer unit.
New Drum Run this after replacing the Drum unit.
FAX Country Code* For details, refer to Fax Settings on page 7-24.
FAX Call Set.* For details, refer to Fax Settings on page 7-24.
* This setting only appears on the FS-1120MFP, FS-1125MFP, FS-1320MFP and FS-1325MFP.