Installation guide

7-12

FAX Operations

Sending Faxes

Fax transmission is explained below.

Basic transmission procedure

The basic procedure for using the fax system is explained below.

1 Press [FAX].

2 Place the originals. For details, refer to Loading Originals on page 2-18.

3 If a program is set, press the program key ([Program 1] - [Program 3]) in which the

program is registered.

4 Enter the fax number of the receiving system using the numeric keys.

Note For details on programs, refer to Using Programs on page 7-15.

Note Up to 64 digits can be entered as the fax number of the receiving system.

Pressing [Address Recall/Pause] adds about three seconds of waiting time during

dialing. For example, when dialing the receiving system on an external line, you can

use this method to insert a pause before resuming dialing after you dial a specific

number.

For the procedure for selecting a destination in the address book, refer to Choosing

from the Address Book on page 7-7.

FAX No. Entry

0123456789