Installation guide

7-13

FAX Operations

5 Adjust density using 7 levels (Lighter -3 to Darker +3).

Press [Density], and press [▲] or [▼] to select your desired density. Press [OK].

6 Selecting the functions.

Press [Menu]. FAX transmission settings can be selected.

7 Press [Start]. When scanning finishes, transmission starts.

Cancelling the Transmission (while originals are being scanned)

To cancel transmission while originals are being scanned, press [Stop/Reset].

Note For the FAX transmission settings, refer to Fax Transmission Functions on

page 7-16.

Note If you scanned the original from the platen, the display will ask if you will scan

another page.

To scan another page, replace the previous page with the next page, select Yes,

and press [OK]. The next page is scanned.

To send the fax, select No and press [OK]. Transmission starts.

Density

Normal 0

FAX Resolution

Scan next orig.