Installation guide

7-27
FAX Operations
• Reception
Adjustment and Maintenance
Adjust printing quality and conduct machine maintenance.
• Service Settings
Item Description
Rings(Normal) The number of rings until the machine answers a call can be changed as needed.
Note This setting does not appear in some regions.
RX Settings Select the reception mode.
Value: Auto(Normal), Auto(DRD)
Note DRD reception mode is only available for Australia and New Zealand. This setting
does not appear in other regions.
Forward Settings Configure Forward Settings. Refer to Forward Settings on page 7-28.
RX Date/Time Reception Date/Time function adds the reception date/time, sender information and
number of pages on the top of each page when the message is printed out. It is useful for
confirming the time of reception if the fax is from a different time zone.
Value: On, Off
Duplex Printing Performs duplex printing if a fax of multiple pages are received when printing a fax.
Value: On, Off
RX Restriction Set Reception Restriction. Refer to RX Restriction on page 7-34.
Unknown Number RX When Reception Restriction is set, you can set whether or not reception is allowed from
parties that do not provide notification of their fax number. Refer to RX Restriction on
page 7-34.
ECM RX Set whether ECM RX is performed.
Value: On, Off
RX Start Speed Set the RX Start Speed.
Value: 9600bps, 14400bps, 33600bps
Note If the Administrator ID entry display appears, use the numeric keys to enter the Administrator ID (4 digits).
The default setting is 2500 for the FS-1025MFP, FS-1125MFP and FS-1325MFP, 2000 for the FS-1120MFP
and FS-1320MFP.
For details of Administrator ID, refer to Administrator ID on page 6-6.
Item Description
FAX Country Code To use this menu, consult your dealer or service representative.
FAX Call Set.*
* This setting does not appear in some regions.
When using this machine in environment in which PBX for connection to multiple phones
for business use is installed, perform the following PBX setting.
Exchange Select. If the machine is connected to a PBX, set PBX.
Value: PBX, PSTN
Dial No. to PSTN Set a number to access an outside line. For the number, contact the PBX administrator.
Value: 0-9, 00-99