Installation guide

7-34
FAX Operations
RX Restriction
Reception from parties registered in the Reject List and parties that have not registered their TTI (own fax number) can be
rejected. (You can select whether reception from parties that have not registered their TTI is allowed or not allowed in
Unknown Number RX on page 7-34.)
Setting RX Restriction
To reject reception from parties registered in the Reject List, follow the steps below.
1 Press [Menu].
2 Press [▲] or [▼] to select System Menu.
3 Press [OK].
4 Press [▲] or [▼] to select FAX.
5 Press [OK].
6 Press [▲] or [▼] to select Reception.
7 Press [OK].
8 Press [▲] or [▼] to select RX Restriction.
9 Press [OK].
10Press [▲] or [▼] to select Reject List.
11Press [OK].
Unknown Number RX
When RX Restriction is set, you can select whether reception from parties that do not provide notification of their TTI (own
fax number) is allowed or not allowed. To change the RX Restriction setting for parties that do not provide notification of
their TTI, follow the steps below.
1 Press [Menu].
2 Press [▲] or [▼] to select System Menu.
Note The Reject List is registered from your computer. For details, refer to Address Book on page 2-39.
Note To set RX Restriction, turn on Enable number blocking. For details, refer to Registering Reject List on
page 2-43.
RX Restriction b
Reject List
Note To set Unknown Number RX, turn on Block all unknown numbers. For details, refer to Registering Reject
List on page 2-43.