Installation guide

2-17
Preparation
2 Align the paper with the paper guides and insert as far as it will go.
3 Specify the paper size and type for Manual Feed tray using KYOCERA Client Tool. For
more information, refer to Configuration on page 2-48.
Note If the paper is considerably curled in one direction, for example, if the paper is
already printed on one side, try to roll the paper in the opposite direction to counteract
the curl.
When loading an envelope, load as shown in the illustration.
Load envelope with the print side facing up.
Note Set the same paper size to the paper size that is set on the machine.
Correct Incorrect
Close the flap.