Installation guide
2-38
Preparation
Print Box Tab
6New Opens Add/Edit FAX List screen.
7Edit A new destination can be added by clicking New. To edit a
destination, select the destination from the list and click
Edit. The destinations stored in the Address Book on the
machine are displayed.
• Directly enter a fax number.
Enter a fax number, and set TX start speed and ECM.
• Select from the Address Book.
Select the Select from Address book check box and
then choose from the destinations displayed.
Note Up to 100 destinations can be added. When a group
is selected from the Address Book, it is converted into the
contact destinations.
Click OK to apply the destination addition or change and
return to the FAX tab.
8 Delete To delete a destination, select the destination from the list and click Delete.
No. Item Description
1
2
3
4
5
No. Item Description
1Name Set a name for the Program. This name is displayed in the message display of the
machine’s operation panel. Up to 18 characters can be entered.
2 Connection Select the interface used to connect with the machine.
Value: Local, Network
3 Destination folder
(Local)
Enter the path for the folder to be used as the Print Box. Program 1 is Box 1,
Program 2 is Box 2 and Program 3 is Box 3.
To select the folder, click Browse to open Browse for Folder.
4 IP address (IPv4) Set the IP address for the computer with the Print Box to be used.
Value: ###.###.###.###
If you select Network for Connection, this setting is available.
5 Destination folder
(Network)
Enter the path for the folder to be used as the Print Box. Program 1 is Box 1,
Program 2 is Box 2 and Program 3 is Box 3.
To select the folder, click Browse to open Browse for Folder.
If you select Network for Connection, this setting is available.