Installation guide

2-45

Preparation

Quick Scan/TWAIN Settings

Settings required for scanning on the machine are explained below. The settings specified here will be the default settings

for scanning.

1 Start KYOCERA Client Tool as explained in Accessing KYOCERA Client Tool on

page 2-26.

2 Click Preferences or Quick Scan Settings on the Scan tab.

TWAIN Settings

Item Description

Preferences Change the TWAIN scan settings. This setting is effective for Quick Scan only.

Quick Scan Settings Change the settings for Scan to PDF, Scan to Email, and Scan to Folder.

No. Item Description

1 Original size Specify the size of originals being scanned. The sizes that can be

selected vary depending on the Feed method setting.

Value: (when the Feed method is Auto or Platen) Letter,

Statement, Executive, A4, A5, A6, B5 (JIS), B5 (ISO), 16K,

Custom

(when the Feed method is Document Processor) Letter, Legal,

Statement, Executive, A4, A5, A6, Folio, B5 (JIS), B5 (ISO),

Oficio II, 16K, 216 × 340 mm, Custom

Note Refer to Configuration on page 2-48 for selecting Custom.